With UltraMaxx™ LIFETIME GUARANTEE, you will never have to worry about window leaks or separation ever again! Clean, finished edge with no piping or stitching around window UltraMaxx™ virtually eliminates window separation and leaks. The process is so reliable, GAHH is able to offer a LIFETIME WARRANTY UltraMaxx™ is the trade name of a revolutionary new convertible top developed by GAHH Automotive. The UltraMaxx™ manufacturing system eliminates the stitching, piping and pressmarks commonly found around the window on all aftermarket tops Originally, convertible tops were only available with plastic windows, and installation was simply sewing the plastic into the topping material. With the advent of glass windows, installation became more complicated and a method of adhering or“gluing” the topping into the glass was required. Heat Sealing is Inadequate Adhering glass to the topping material is difficult because glass does not want to adhere to anything and topping materials are engineered to repel everything. Most car manufacturers adopted a process called“heat sealing.” Installation involved placing a plastic tape between the glass and the topping and electricity was applied until the tape melted. Unpredictability of this process resulted in a high failure rate of the bond. This failure can cause water leaking into the car or the window falling out of the top completely. Sealing With Silicone is Also Inadequate When aftermarket convertible tops were initially produced, most manufacturers chose to use the heat sealing method developed by the OEMs. They continued to have mixed results with this process and failures continued to occur on a regular basis. Some aftermarket manufacturers, because of cost and complexity, chose to use a silicone adhesive to adhere the windows into the toppings. This process was prone to be even less reliable than heat sealing. The GAHH Process GAHH Automotive decided that a better method of installation was necessary. An engineering team set forth to develop a process that would address the problems of separation and leakage with the added benefit of a more“factory finished” appearance. After many hours of researching, prototyping and testing, GAHH developed a new patent pending process that virtually eliminates all of the inherent problems of heat seals or silicone. This process is so unique, that completely automated equipment had to be designed in order to manufacture the tops. This proprietary process involves wrapping the topping around an internal support structure and adhering the glass to the resulting assembly with a special bonding agent, developed specifically for GAHH Automotive. The resulting bond between the glass and the topping is extremely strong, and also has no stitching or piping. Trademarked as UltraMaxx™, these tops have set a new standard in the industry. EXCLUSIVE LIFETIMEWARRANTY UltraMaxx™ Tops, manufactured by GAHH Automotive are constructed using a patent pending bonding system to attach the glass window to the topping material. This bond is so strong that GAHH Automotive guarantees it for life, with no gimmicks or fine print. Simply put, if the window in your GAHH UltraMaxx™ Top separates, delaminates, leaks or falls out... GAHH will replace the entire top at no charge to you... Forever!